Occasionally, you may want to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the configurations or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a simple process that can be performed in just a few actions.
- First ensuring your red dot sight is turned on.
- Locate the small reset button on the side of the unit.
- Employ a paperclip to depress the reset button for approximately 5 moments.
- Disengage the lever and your Holosun EPS Carry Red Dot sight will restart.
- Your red dot sight should now be reverted to its factory settings.
Restore Your Holosun EPS Carry Red Dot toward Defaults
In case you've tweaked your Holosun EPS Carry red dot settings and want to go back to basics, resetting it to default configuration is a breeze. First, determine the tiny button on the side of your optic. Then, press and hold it for around five seconds until you see the red dot blink. Your Holosun EPS Carry is now reset to its factory settings, ready for consistent targeting.
Bring Your Holosun EPS Carry Back to Action
Is your beloved Holosun EPS Carry experiencing some performance problems? Don't despair! A simple factory reset can often fix the problem and get your red dot sight back to its former glory. Before you begin, remember to detach the battery from your Holosun EPS Carry to prevent unintended activation during the process.
To perform a factory reset on your Holosun EPS Carry, follow these straightforward steps:
- Hold down the power button for approximately 7 seconds.
- A message will flash, indicating that the reset is in progress.
- Release the power button once the reset is complete.
Your Holosun EPS Carry should now be back to its factory settings. You can insert the battery click here and test your sight's functionality. If you encounter any further difficulties, don't hesitate to contactHolosun's customer support.
Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide
Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Adhere to these steps carefully to ensure a successful factory reset.
- Beginning with, Energize your Holosun EPS Carry by pressing the power button.
- Next, press and hold both the mode button and the up/down adjustment button simultaneously.
- As you continue holding these buttons, press the power button once.
- A message will show a confirmation prompt indicating that the reset process is initiated.
- Enable the process to conclude. This may take a few moments. Once done, your Holosun EPS Carry will automatically shutdown.
After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.
Erase All Settings on Your Holosun EPS Carry
To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Pressing a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select this option and confirm the reset. Your sight will then power off and restart with all settings Returned to their default values.
Reset your Holosun EPS Carry with a Factory Default Settings
If your Holosun EPS Carry is acting funny, a factory reset might be the answer. This will restore your sight to its original settings, clearing any custom configurations you've made. To accomplish this reset, observe these straightforward steps:
- Initially, locate the reset lever on your EPS Carry.
- Secondly, engage a thin object, like a toothpick, to depress the reset lever.
- During maintain the reset switch activated, power on your EPS Carry.
- It will flash a message indicating that the reset is finished.
When the reset is finished, your EPS Carry will be back to its factory settings.